SUCTION TURBINE
The large-diameter (450 mm) suction turbine guarantees high suction capacity. Both the suction hose and the exhaust pipe are Ø200 mm in diameter, virtually eliminating blockages in the material being conveyed. The suction turbine has a replaceable casing when worn and is also rubber-lined to dampen the drumming noise of the sucked material. ELIET deliberately chose to separate the gasoline engine from the suction turbine. This is fully anchored to the support frame so that the force acting on the turbine has no impact on the engine.
SOUND-DAMPING TURBINE WALL
Every leaf or pebble sucked up follows the wind flow through the suction hose and strikes the impeller. Centrifugal force throws everything against the turbine wall, where it follows the shape of the volute all the way to the blowpipe. The turbine wall thus acts as a kind of drum that generates a lot of noise. However, thanks to a modified rubber sleeve, Eliet manages to dampen the sound of each impact.
TRANSPARENT SUCTION HOSE
The Truckloader is also equipped as standard with a transparent vacuumflex suction hose. This highly flexible suction hose is 3.5 m long and transparent. The suction nozzle rests on a caster wheel, so it doesn't have to be constantly held up. The lightweight and transparent suction hose barely restricts freedom of movement and allows you to immediately locate and clear any blockages in the hose. A special quick-coupling system allows you to easily slide the suction hose off the machine. The safety feature is also activated immediately and switches off the engine if necessary. An "Easyhandle™" is also available as an option. This suction nozzle features two casters with a movable seat for even greater operator comfort. The suction hose is supported by a 1.5 m support arm to prevent unnecessary drag on the ground and wear.
IMPELLER WHEEL
The impeller is attached to the crankshaft with a conical clamping bush, which makes disassembly always easy.
CARRYING HANDLES
Two sturdy carrying handles allow two people to lift the machine and hook it to the truck.
360° ROTATING BLOWPIPE
The exhaust pipe with adjustable valve has a 200 mm diameter, just like the suction hose, making clogging virtually impossible. The curved pipe, made of welded, rigid steel components, also rotates 360°. The pivot point is made of nylon, is self-lubricating, and therefore never becomes clogged by dirt or rust.
SUPPORTS
The supports that hang the piston on the truck have adjustable feet with rubber soles.
DIRECTED VALVE
To fill the truck's cargo hold to the brim, a deflector flap is fitted at the end of the blower pipe. This flap can be adjusted to any angle. The shape of the flap prevents the airflow from immediately diverging upon exiting the blower pipe, making it easier to direct.
MOVE MACHINE
The frame rests on two wheels, which makes it easy to move and store the machine.