225° ROTATING BLOWPIPE
The blower chute is fully electric and is controlled via a user-friendly joystick. Within a 215° radius, the user can easily direct the milled snow to their chosen location.
THE RED BUTTON
When reversing while clearing snow, it's advisable to raise the cutter head. To do this quickly and efficiently, ELIET provides a red push button on the joystick that can be operated with the index finger while moving it backward. A key advantage is that the operator can determine how high they want to raise the cutter head, which can save time if the cutter head has to be lowered immediately afterward to re-drill the snow.
LEFT-HAND OPERATION
When designing the instrument panel, ELIET ensured that the operator's left hand, which normally rests passively on the deadman's handle, can still contribute to the snowplow's operation. A small electric joystick is positioned so that it can be operated with the left thumb. This allows the operator to control the position of the plow head. By activating the left hand, the operator can simultaneously control almost all the machine's fundamental functions without having to move their hands.
MILLING HEAD CONTROL
The Snowbob's milling head has a working width of 90 cm and a clearing height of 62 cm. In collaboration with Parker, an electro-hydraulic piston was developed that allows the milling head to be lifted within a range of -30 mm to +200 mm. The milling head moves from its lower to its upper working position in less than 5 seconds. The same actuator is used to tilt the milling head laterally by 18° to the left and right.
HEATING
When the temperature drops well below zero and an icy wind blows, lowering the perceived temperature by several degrees, one of the Snowbob's key advantages comes into its own. The Snowbob is equipped with an operator heating system. The machine's engine is fully integrated into the chassis. The cooling air, which keeps the engine and transmission at optimal operating temperature, is redirected within the machine so that the heated air is blown towards the operator. A large grille at the rear of the machine directs warm air onto the operator's lower body. A narrow grille above the dashboard directs the warm air to the operator's hands on the controls. The machine's handles are also warmed by the warm air.
Professional users who use the machine for several hours every day really appreciate this feature.
TRACKS
Just as tires are crucial to a race car's performance, tracks also determine the efficiency of a snowplow. ELIET opts for top-quality Bridgestone. The track, specially developed for snow, features a modified rubber compound and a special pattern for optimal grip. The track has a cast iron core, giving it excellent stability. To operate efficiently, a snowplow must always maintain optimal grip on the snow. The machine's weight distribution is important for this, but the contact surface with the snow remains crucial. The Snowbob is fitted with 200 mm wide tracks that have a 700 mm ground contact area.
SHUTTER ROLLERS
The ELIET Snowbob's track features two support rollers with a swinging suspension. This allows the track to easily adapt to the unstable terrain a snowplow often encounters. This guarantees maximum ground contact, giving the machine optimal stability. This is further enhanced by the widest possible roller tread. The swinging rollers are robustly constructed and equipped with dust-proof ball bearings that are further protected by protective shields.
FREES
Anyone who looks at the cutter will see its durability. The spiral has an aggressive tooth shape that bites firmly through icy snow. ELIET opted for 6mm Hardox steel, which makes the cutter virtually indestructible, even in the toughest conditions.
The milling machine is supported in the housing on sturdy cast iron bearing blocks which are provided with lubrication points.
Milling head protection:
a. Armor
The reduction gear is equipped with sturdy armor that provides double protection when colliding with a hidden obstacle. The wedge shape of this armor reduces drag and improves snow flow to the suction turbine.
b. Slip clutch
Replacing shear bolts is no longer a concern with the Eliet Snowbob. Eliet protects the cutter head with a friction disk. If the cutter is blocked by a stone, for example, the friction disk will slip. In that case, simply removing the obstacle is enough to get back to work. The slipping torque is therefore
EASE OF MAINTENANCE
Besides the machine's operational reliability, it's equally important for the user that maintenance can be performed as quickly as possible and with minimal effort. Just like on race cars, the snow thrower's side doors swing up, providing easy access to all serviceable components, such as the engine, belts, hydraulic filters, and more.
CARDINAL SHAFT DRIVE
The movable milling head is driven by a cardan transmission. This has the significant advantage that the milling head can be disassembled very quickly for maintenance. Furthermore, the multi-purpose support system allows other attachments to be mounted and driven.